Neebol Power Supply Instructions
1.Output voltage 5V-12V corresponds to the display
2.Charging voltage DC5V/1A,TYPE-Cport.The
number 5.0-12.0.
remaining battery level is displayed on the right side
of the screen, with each horizontal bar representing
25%.The horizontal bars will flash when the battery is
charging.when fully charged, the screen will display
4 horizontal bars.
3. Long press the power button to turn on/off,press
the button to pause/resume after turning on, the
display shows"--" for pause.Pause after 1 hour it will
automatic shutdown.
4." "-" buttons are voltage adjustment buttons,long
press to continuously increase or decrease the
5. Long press the“ ""-" buttons simultaneously for
voltage.
about 1.5 seconds to turn on/off the jump start.
Display shows"L" means jump start is off.Display
shows"H" means jump start is on.
6.When the battery power is too low the screen will
flash, please charge in time.
7.When you turn it on, the first thing that shows up is
working voltage and battery level.
"L"or "H,"jump-start mode status, then shows the
is 1400MAH. If you use a 5V/1A charger to charge,
8.There is a charge current limit. The battery capacity
the charging time is about 3 hours.
Attentions
1.This product is not recommended to
use while charging,which is easy to
damage the battery.
2.Not used for a long time,please
charge the power every three months
to avoid power depletion.
3.During use, if power cannot be turned
on, Please plug in the charger to
charge to reactive.
batteries are strictly prohibited into the
*This product contains lithium
liquid, squeeze, knife stab, fire,etc.
Thank you for using this product.